Commit Graph

70 Commits

Author SHA1 Message Date
f421b23bd7 Add appsync patch. 2023-03-04 13:58:15 +01:00
Hiltjo Posthuma
94b8ec0021 Partially add back in "support REP (repeat) escape sequence"
Add the functionality back in for xterm compatibility, but do not expose the
capability in st.info (yet).

Some notes:

It was reverted because it caused some issues with ncurses in some
configurations, namely when using BSD padding (--enable-bsdpad, BSD_TPUTS) in
ncurses it caused issues with repeating digits.

A fix has been upstreamed in ncurses since snapshot 20200523. The fix is also
backported to OpenBSD -current.
2020-05-30 22:04:28 +02:00
Hiltjo Posthuma
475a0a36cb Revert "support REP (repeat) escape sequence"
This reverts commit e8392b282c.

There is currently a bug in older ncurses versions (like on OpenBSD) where a
fix for a bug with REP is not backported yet. Most likely in tty/tty_update.c:

Noticed while using lynx (which uses ncurses/curses).
To reproduce using lynx: echo "Z0000000" | lynx -stdin

or using the program:

int
main(void)
{
	WINDOW *win;
	win = initscr();

	printw("Z0000000");

	refresh();

	sleep(5);

	return 0;
}

This prints "ZZZZZZZ" (incorrectly).
2020-05-16 21:06:13 +02:00
Avi Halachmi (:avih)
e8392b282c support REP (repeat) escape sequence
The sequence \e[Nb prints the last printed char N (more) times if it's
printable, and it's ignored after newline or other control chars.

This is Ecma-048/ANSI-X3.6 sequence and not DEC VT. It's supported by
xterm, and ncurses uses it when possible, e.g. when TERM is xterm* (and
with this commit also st*).

xterm supports only codepoints<=255, possibly due to internal limits.
We support any value/codepoint which was placed in a cell.

To test:
- tput rep 65 4 -> prints 'AAAA'
- printf "\342\225\246\033[4b" -> prints U+2566 1+4 times.
2020-05-16 14:08:10 +02:00
Roberto E. Vargas
f8afebdfa0 Add rin terminfo capability
Tianlin Qu discovered that st is missing rin (scroll back #1 lines).
2020-05-16 14:07:31 +02:00
Roberto E. Vargas Caballero
771bc401f7 Add st-mono terminfo entry
This entry is intended for monocolor display and it is very
helpful for color haters.
2020-04-11 15:23:23 +02:00
Roberto E. Vargas Caballero
019449a7e6 Add terminfo entries for backspace mode
St used to use backspace as BS until the commit 230d0c8, but due
to general lack of knowledge of lusers, we moved to the most common
configuration in linux to avoid answering the same question 3 times
per month. With the most common configuration we have a backspace
that returns a DEL, and we have a Delete key that doesn't return a
DEL character neither a BS.

When dealing with devices connected using a serial line (or even
with Plan9) it is more common Backspace as BS and Delete as DEL. For
this reason, st is not always the best tool when you talk with a
serial device.

This patch adds new terminfo entries for Backspace as BS and Delete
as DEL. A patch for confg.h is also added, to make easier switch
between both configurations.
2020-04-11 15:23:23 +02:00
Sebastian J. Bronner
83866428de Fix tmux terminfo extensions Se and Ss
The tmux terminfo extensions Ss and Se are currently specified as
booleans in `st.info`. They should be strings. See
eeedb43ae8/tty-term.c
lines 254 and 265.

I have used the values from
https://invisible-island.net/ncurses/terminfo.src.html#toc-_S_I_M_P_L_E_T_E_R_M
for this patch.
2019-11-05 19:51:35 +01:00
Quentin Rameau
c0882f2ed1 Add dim/smxx/rmxx to terminfo, remove duplicate kich1 2017-07-12 13:29:30 +02:00
Marc André Tanner
b331da550b Add color change terminfo capabilities 2017-06-03 22:28:35 +02:00
osandov@osandov.com
e7ed326d2e Support xterm Ms feature to set clipboard
This is used by, e.g., tmux.
2017-03-19 20:32:22 +01:00
pl@ninthfloor.org
06f8cf8ca8 Add tmux capabilities to st.info 2016-11-14 19:05:11 +01:00
Roberto E. Vargas Caballero
078337d745 Delete ncv capability from terminfo
We do not need to disable the previous ncv definition, because
there is not previous definition.
2016-09-09 13:11:06 +02:00
Quentin Rameau
5ce853a1c1 st.info: do not prevent st from displaying attributes
With ncv set to 3, we prevent st from displaying A_STANDOUT and
A_UNDERLINE with colors while our virtual terminal is capable of it.
2016-09-09 11:05:11 +02:00
Quentin Rameau
9984ad4ba7 st.info: replace the acsc entry from xterm to urxvt
The current acsc entry, copied from xterm was not exposing capability to
display arrows.
2015-08-12 09:02:12 +02:00
Christoph Lohmann
230d0c8428 Finally resolving the backspace problem.
The majority now using the Linux behaviour. Minorities have to live in their
ghettos.
2015-03-10 00:00:44 +01:00
Johannes Postma
487bbb24d0 Update kdch1 definition to three octal digits.
ncurses wasn't able to detect the delete-character key as KEY_DC.  This
patch fixes that.

kdch1 was defined as "\0177", but terminfo(5) states:
	... characters may be given as three octal digits after a \.

The delete-character key is correctly defined in config.def.h.
2015-03-07 18:21:19 +00:00
Ivan Delalande
1b514048b2 Let curses do the dirty work for flash
Use the terminfo delay syntax ($<x>) in our flash capability to avoid
hardcoding a fixed delay in redraw() when called from tsetmode() with
DECSCNM.
We need to turn on the npc capability so that delays are made with
xon/xoff instead of padding characters.
2015-02-22 11:53:34 +00:00
Christoph Lohmann
cd159883d1 Reverting smacs and rmacs to the xterm defaults.
These are needed by ncurses to correctly handle the switch between line
drawing. The changes to the alternative characterset code already fixed the
urwid hack.
2014-10-21 16:36:01 +02:00
Roberto E. Vargas Caballero
dcfe505d3c Use G1 for alternate charset
St has enacs, which must be printed if a program requires to use
the alternate charset (graphic charset), that in st case was to
select charset graphic for G1, but it was not useful
at all because smacs and rmacs were always redefining the value
of G0.
2014-10-08 11:35:45 +02:00
Roberto E. Vargas Caballero
9d9e049eac Make useful DEL in application mode
DEL key has to generate the sequence ^[P in application mode,
because such sequence means delete current character. It implies
that the character sent in keypad mode must be ^? (DEL character).
2014-08-19 12:57:43 +02:00
Roberto E. Vargas Caballero
821a6e00a5 Remove ul capability
This capability indicates that underscore '_' overstrike current
letter under the cursor. It means that you can generate a
underline 'b' using 'b^H_', because it writes a 'b' then backward
one characther and then overstrike '_'. St has not such behaviour,
so it is an error to have this capability.
2014-08-07 10:19:48 +02:00
Roberto E. Vargas Caballero
c46d929fe1 Fix Backspace and Delete characters
Backspace key must generate the backspace character (\010) and
Delete key must generate the delete character (\0177). In
some systems the kernel configuration for erasing previous character
is \0177, so some programs (for example cat, ed, mail, ...), can not
understand the correct meaning of backspace. In this cases it is only
needed this command:

	stty erase 
2014-04-11 15:08:37 +02:00
Roberto E. Vargas Caballero
85f8a414be Add terminfo entries for printer
These capabilities inform to programs how print in local printer
of the terminal.
2014-03-06 07:55:21 +01:00
Eric Pruitt
2738592de6 Fix rmul definition
rmul means "exit underline mode", so a full reset of all
the attributes is not the correct way of exiting from
underline mode, because it is going to modify also another
attributes not related.
2013-12-10 17:21:12 +01:00
Roberto E. Vargas Caballero
4579693818 Add terminfo definitions for terminals with meta key
Some programs don't check the value of km and use smm and rmm
capabilites, and they cause the terminal change to meta enabled
mode even in cases where is not desirable.

Allmost all people is using the terminal waiting that meta sends
escape, so rmm and smm are not needed. If someone needs meta
sets 8 bit he can use the correct terminfo definition in TERM.
2013-08-12 16:53:09 +02:00
Christoph Lohmann
1e09726518 Enable blinking in st. 2013-04-26 18:41:54 +02:00
Christoph Lohmann
7ea6863208 Yes, rs2 != is2. 2013-04-23 15:38:48 +02:00
Christoph Lohmann
8037dac847 There is no 8bit by default and reset 8bit too. 2013-04-23 15:33:21 +02:00
Christoph Lohmann
2bd6afd1c9 Implementing 8 bit mode for meta. 2013-04-23 15:22:14 +02:00
Christoph Lohmann
b78c5085f7 Implementing Back Color Erase (BCE). 2013-01-20 14:54:35 +01:00
Christoph Lohmann
f741df9cda Standout is now reverse. This makes bsd-games work in st. 2013-01-08 19:46:28 +01:00
Roberto E. Vargas Caballero
d5994b43ca Add support for End key
- Shift + End : Delete until end of line.
    - Control + End : Delete until end of screen.

When  the End  key is  pressed  without any  modifier is  not generated  the
correct sequence for it  (going to the end of the  screen), because the size
of the  terminal is not known,  so it is  not possible write a  sequence for
this purpouse.
---
 config.def.h |   10 ++++++++--
 st.info      |    2 ++
 2 files changed, 10 insertions(+), 2 deletions(-)
2012-11-25 22:13:29 +01:00
Roberto E. Vargas Caballero
7c34ff1703 Add support for Supr key
Del : Delete character under cursor.
    Shift + Del : Delete the line under cursor.
    Ctrl + Del: Delete the full screen.
---
 config.def.h |   16 ++++++++++++----
 st.info      |    2 ++
 2 files changed, 14 insertions(+), 4 deletions(-)
2012-11-25 22:13:24 +01:00
Roberto E. Vargas Caballero
3c99be68e8 Add support for insert key
Insert key stands for a key which allows enter or leaves insert mode, so let
it generates the correct sequence to change between these modes:

   - Insert: Enter in insert mode.
   - Shift + Insert: Leave insert mode (replace mode).
   - Control + Insert: Insert a blank line.

Like Shift + Insert also paste text, if a user want this feature be full
functional he has to modify such shortcut.
---
 config.def.h |   16 ++++++++++++----
 st.info      |    3 +++
 2 files changed, 15 insertions(+), 4 deletions(-)
2012-11-25 22:13:19 +01:00
Roberto E. Vargas Caballero
e7904128c6 Fix value of ka1 terminfo capability
ka1 stands for upper left of keypad, so the correct value is the one
generated by Home in application keypad mode.
---
 st.info |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
2012-11-25 22:13:13 +01:00
Christoph Lohmann
801ea034b6 Import the patch of Eckehard Berns to add insert mode. Thanks! 2012-11-15 16:21:23 +01:00
Roberto E. Vargas Caballero
620e3bb39e Add missed key definitions
This patch adds the keys for the keypad (in both modes, application mode or
ansi mode) and function keys. It uses the same convention than xterm and
instead of using the XK_Fxx values it generates them using F1-F12 and
modifiers. For example:

   F1 -> ^[OP
   F1 + Shift = F13 -> ^[[1;2P
   F1 + Control = F25 -> ^[[1;5P
   F1 + Mod2 = F37 -> ^[[1;6P
   F1 + Mod1 = F49 -> ^[[1;3P
   F1 + Mod3 = F61 -> ^[[1;4P

It is also important notice than the terminfo capability kIC (shifted insert
key) only can be generated using the keypad keyboard, because the shorcut
for selection paste is using the same combination.

After this path the number of elements in the Key array becomes high, and
maybe a sequencial search is not enough efficient now.
---
 TODO         |    6 +---
 config.def.h |  102 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 st.info      |   70 ++++++++++++++++++++++++++++++++++++++--
 3 files changed, 169 insertions(+), 9 deletions(-)
2012-11-13 20:05:02 +01:00
Roberto E. Vargas Caballero
44597b359e Add control and meta combinations for arrow keys
Since there isn't any terminfo capability for control and meta modifiers for
arrows keys it is necessary use the same that almost terminal emulators use,
because there are a lot of programs which have these codes hardcoded.

This cause also that shift combinations are also changed, but in this case
this is not a problem since there are terminfo capabilities for them. After
this patch shift-up and shift-down continue not working in emacs with
TERM=st, but they work with TERM=xterm, so it is possible some other changes
are necessary in the terminfo entry.
---
 config.def.h |   16 ++++++++++++----
 st.info      |    8 ++++----
 2 files changed, 16 insertions(+), 8 deletions(-)
2012-11-13 20:04:54 +01:00
Roberto E. Vargas Caballero
3b16695f4e Fix arrow keys terminfo capabilities
Usually the arrow keys generate the ANSI sequence which terminal will
understand like a movement, so it is not necessary any dealing for them, the
program can not know if the sequence is generate for a echo key or directly
from the program. If you need really know if the key was pressed then you
need activate the keypad mode where the keys will generate a special code
for each keypad key.

The terminfo capabilities kcub1, kcud1, kcuf1 and kcuu1 are used for this
keypad code, not for the sequence generate in the ansi mode.
---
 st.info |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
2012-11-13 20:04:50 +01:00
Roberto E. Vargas Caballero
69ee3ba3a7 Fix keypad mode and cursor mode
Keypad mode is used for detecting when keys in the auxiliary keypad are
pressed, while cursor mode is used for detecting when a cursor is pressed,
but they are different modes.

St was mixing both modes and DECPAM and DECPNM modified the cursor mode, and
this was incorrect.
---
 st.c    |    5 +++--
 st.info |    4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)
2012-11-13 20:04:34 +01:00
Christoph Lohmann
980c5956ed Enabling enacs and adding compatibility to xterm and urxvt for alternative
charsets.
2012-09-25 21:17:43 +02:00
Christoph Lohmann
462a966ee2 Implement italic font support. 2012-09-05 21:48:26 +02:00
Christoph Lohmann
a61b9ea82e Enable keypad set and unset commands. 2012-09-05 01:25:37 +02:00
Christoph Lohmann
da4a77edbe Disable BCE again. 2012-09-05 00:58:17 +02:00
Christoph Lohmann
052a617828 Updating the TODO and enabling BCE. 2012-09-04 22:05:24 +02:00
Christoph Lohmann
466decd535 Fixing a type in in2 in the st.info. 2012-09-03 21:54:40 +02:00
Christoph Lohmann
cfefa054e8 Patch from Roberto Vargas. »Add initialization strings in terminfo«
Taken from the description:

When tput init is executed the list of task performed are (taken from
terminfo(5)):

              run the program
                     iprog

              output is1 is2

              set the margins using
                     mgc, smgl and smgr

              set tabs using
                     tbc and hts

              print the file
                     if

              and finally
                     output is3.

When reset is executed, a more stronger initialization process is performed,
so the terminal can return from an unknown state. rs1, rs2 and rs3 are used
in this case instead of
using is1, is2 and is3.

This patch makes is2 = rs2, resets insert mode and set normal keypad
mode. For rs1 it performs a full initilization using ^[c.
2012-09-03 21:50:22 +02:00
Christoph Lohmann
b11d85c9be Add standout mode. 2012-09-02 19:53:50 +02:00
Roberto E. Vargas Caballero
4cdcc39539 Add vpa terminfo capability
---
 st.info |    2 ++
 1 file changed, 2 insertions(+)
2012-09-02 19:08:52 +02:00