101 lines
4.4 KiB
INI
101 lines
4.4 KiB
INI
[general]
|
|
; The reaper thread will check every 5 seconds for exited clients, for config file changes, and for the CPU/iGPU power balance
|
|
reaper_freq=5
|
|
|
|
; The desired governor is used when entering GameMode instead of "performance"
|
|
; desiredgov=schedutil
|
|
desiredgov=performance
|
|
; The default governor is used when leaving GameMode instead of restoring the original value
|
|
;defaultgov=powersave
|
|
|
|
; The iGPU desired governor is used when the integrated GPU is under heavy load
|
|
; igpu_desiredgov=powersave
|
|
; Threshold to use to decide when the integrated GPU is under heavy load.
|
|
; This is a ratio of iGPU Watts / CPU Watts which is used to determine when the
|
|
; integraged GPU is under heavy enough load to justify switching to
|
|
; igpu_desiredgov. Set this to -1 to disable all iGPU checking and always
|
|
; use desiredgov for games.
|
|
igpu_power_threshold=-1
|
|
|
|
; GameMode can change the scheduler policy to SCHED_ISO on kernels which support it (currently
|
|
; not supported by upstream kernels). Can be set to "auto", "on" or "off". "auto" will enable
|
|
; with 4 or more CPU cores. "on" will always enable. Defaults to "off".
|
|
softrealtime=auto
|
|
|
|
; GameMode can renice game processes. You can put any value between 0 and 20 here, the value
|
|
; will be negated and applied as a nice value (0 means no change). Defaults to 0.
|
|
renice=10
|
|
|
|
; By default, GameMode adjusts the iopriority of clients to BE/0, you can put any value
|
|
; between 0 and 7 here (with 0 being highest priority), or one of the special values
|
|
; "off" (to disable) or "reset" (to restore Linux default behavior based on CPU priority),
|
|
; currently, only the best-effort class is supported thus you cannot set it here
|
|
ioprio=0
|
|
|
|
; Sets whether gamemode will inhibit the screensaver when active
|
|
; Defaults to 1
|
|
inhibit_screensaver=1
|
|
|
|
[filter]
|
|
; If "whitelist" entry has a value(s)
|
|
; gamemode will reject anything not in the whitelist
|
|
;whitelist=RiseOfTheTombRaider
|
|
|
|
; Gamemode will always reject anything in the blacklist
|
|
;blacklist=HalfLife3
|
|
; glxgears
|
|
|
|
[gpu]
|
|
; Here Be Dragons!
|
|
; Warning: Use these settings at your own risk
|
|
; Any damage to hardware incurred due to this feature is your responsibility and yours alone
|
|
; It is also highly recommended you try these settings out first manually to find the sweet spots
|
|
|
|
; Setting this to the keyphrase "accept-responsibility" will allow gamemode to apply GPU optimisations such as overclocks
|
|
;apply_gpu_optimisations=0
|
|
|
|
; The DRM device number on the system (usually 0), ie. the number in /sys/class/drm/card0/
|
|
;gpu_device=0
|
|
|
|
; Nvidia specific settings
|
|
; Requires the coolbits extension activated in nvidia-xconfig
|
|
; This corresponds to the desired GPUPowerMizerMode
|
|
; "Adaptive"=0 "Prefer Maximum Performance"=1 and "Auto"=2
|
|
; See NV_CTRL_GPU_POWER_MIZER_MODE and friends in https://github.com/NVIDIA/nvidia-settings/blob/master/src/libXNVCtrl/NVCtrl.h
|
|
;nv_powermizer_mode=1
|
|
|
|
; These will modify the core and mem clocks of the highest perf state in the Nvidia PowerMizer
|
|
; They are measured as Mhz offsets from the baseline, 0 will reset values to default, -1 or unset will not modify values
|
|
;nv_core_clock_mhz_offset=0
|
|
;nv_mem_clock_mhz_offset=0
|
|
|
|
; AMD specific settings
|
|
; Requires a relatively up to date AMDGPU kernel module
|
|
; See: https://dri.freedesktop.org/docs/drm/gpu/amdgpu.html#gpu-power-thermal-controls-and-monitoring
|
|
; It is also highly recommended you use lm-sensors (or other available tools) to verify card temperatures
|
|
; This corresponds to power_dpm_force_performance_level, "manual" is not supported for now
|
|
;amd_performance_level=high
|
|
|
|
[supervisor]
|
|
; This section controls the new gamemode functions gamemode_request_start_for and gamemode_request_end_for
|
|
; The whilelist and blacklist control which supervisor programs are allowed to make the above requests
|
|
;supervisor_whitelist=
|
|
;supervisor_blacklist=
|
|
|
|
; In case you want to allow a supervisor to take full control of gamemode, this option can be set
|
|
; This will only allow gamemode clients to be registered by using the above functions by a supervisor client
|
|
;require_supervisor=0
|
|
|
|
[custom]
|
|
; Custom scripts (executed using the shell) when gamemode starts and ends
|
|
start=notify-send "Gamemode" "Started"
|
|
; wlr-randr --output eDP-1 --scale 1
|
|
; /home/me/bin/stop_ethmining.sh
|
|
|
|
end=notify-send "Gamemode" "Stoped"
|
|
; wlr-randr --output eDP-1 --scale 1.25
|
|
; /home/me/bin/start_ethmining.sh
|
|
|
|
; Timeout for scripts (seconds). Scripts will be killed if they do not complete within this time.
|
|
script_timeout=10
|